|
Sea Catch Hydraulic-activated Units |
Sea Catch Products Sea Catch Prices Sea Catch Home |
The Sea Catch TR7RAM Specifications:
- Unit Dimensions: Over All Length 6.62 inches.
- Unit Weight: 5 lbs.
- Break load: 35,210 lbs.
- Capacity (5:1): 7,042 lbs.
- Hydraulic Cylinder (single acting): ENERPAC® TS-4131ST, Thrust: 980#, .51" stroke.
- Recommended Shackle Size: 5/8 inch.
The Sea Catch TR10RAM Specifications:
- Unit Dimensions: Over All Length 9.75 inches.
- Unit Weight: 16 lbs.
- Break load: 79,222 lbs.
- Capacity (5:1): 15,844 lbs.
- Hydraulic Cylinder (single acting): ENERPAC® TS-4131ST, Thrust: 980#, .51" stroke.
- Recommended Shackle Size: 1 inch.
The Sea Catch RAM model is a standard Sea Catch unit fitted with a hydraulic cylinder mounted below the device. Above the cylinder is a plunger which penetrates through a hole in the body below the toggle pin. When activated, the cylinder pushes the plunger and the toggle pin upward causing the Sea Catch to release. The usual manual release capability is maintained.
The Sea Catch RAM models can be operated remotely via a single 1/4" hydraulic hose. An Enerpac® Electric Pump Model PUD 1101B
preset to 5,000 psi, an air-hydraulic foot pump that generates 10,000 psi hydraulic pressure from 90 psi shop air, or an Enerpac P-141
hydraulic hand pump reset to 5,000 psi are all recommended power sources. The maximum hydraulic pressure for all hydraulic cylinders is 5,000 psi.
Other Sea Catch RAM models are now available. Call for more details.